Peavey SP Plus Synopsis
Adds rev 2.0 firmware (i.e. Akai sample reading) and effects
Architecture is typical sample based subtractive (i.e. PCM->DCF->DCA).
Key Features
- Aftertouch: Poly or channel routed to pitch, filter, amp, and pan
- Architecture Class: sampler
- Audio IO: Stereo main and dual sub outputs (4 total) can be configured as stereo or mono
- Audio Source: 16 bit (12-48kHz) samples (200 max)
- Communication Interface: MIDI, dual SCSI
- Effects: Reverb, Delay, Chorus, EQ
- EG: Dual ADR (3 rate) EGs can be routed to pitch, filter, amp, pan
- Expansion: Load samples via MIDI SDS, 3.5" DSHD floppy drive, SCSI/SMDI (1.2GB max HD), or an SX sampling module (Firmware 2.0 reads Akai S1000 CDs via SCSI)
- Filter: low pass
- Form Factor: 1U rack
- Key Scaling: Routed to filter and pan
- LFO: Routed to pitch, filter, amp, and pan with polarity. Waveforms are triangle, square, saw, sine, clipped sine, sample and hold, random, grunge
- Memory:
- Multi Memory: 16
- Patch Memory: 128
- PCM Memory: N/A
- Sample Memory: 2MB (1MW), expandable to 32MB (16MW) via 1Mx8 or 4Mx8 pairs of 30 pin non-parity (Mac) SIMMS, 100ns or faster (install in pairs)
- Sequencer Memory: N/A
- Multitimbral: 16
- Pedal Inputs: N/A
- Performance Control: 4 MIDI CC's (including mod wheel) are routed to pitch, filter, amp, and pan
- Polyphony: 32 (16 stereo)
- Power: AC
- Released: 1991
- Sequencer: no
- Signal Class: digital
- Velocity: Routed to pitch, filter, amp, and pan
Further Information
- Sampler (musical instrument)
- Digital synthesizer
- Further Information:
- Owners manuals: